Estimación de la resistencia al movimiento de un tren tractor de ruedas en ensayos de campo
DOI:
https://doi.org/10.54139/revinguc.v29i1.155Palabras clave:
Dinamómetro, Resistencia a la Tracción, Corrimiento, RemolqueResumen
El propósito del estudio fue determinar la resistencia al movimiento de un tren tractor de ruedas teniendo en cuenta la naturaleza aleatoria de los cambios en los factores operativos externos. La investigación se basó en el ejemplo de la unidad MTZ-80+2PTS-M en el distrito Mariinsky de Kemerovo (Rusia) en 2021. Se utilizó el método de dinamometría de control para determinar las características probabilísticas de la resistencia a la tracción de un remolque agrícola y su dependencia del modo carga-velocidad. Los estudios se realizaron en varios fondos (carretera sin asfaltar, rastrojo de cereales y campo de siembra) con una carga de remolque de mínima a máxima. Los autores han estudiado la evaluación energética de una unidad tractora de transporte en relación con las condiciones específicas de producción natural de su funcionamiento. Con base en los resultados, los autores revelaron la influencia de los modos de operación de alta velocidad y carga de un tren tractor y determinaron los valores racionales del peso operativo.
Descargas
Citas
G. Bisenov, “Use of tractor trains for transportation of agricultural cargo,” Agricultural machines and technologies, vol. 4, pp. 32–34, 2012.
A. Smetnev, A. Feryabkov, and Y. Yudin, “Methods of intensification of transport and technological processes in agricultural production,” Vestnik RGAZu, vol. 22, no. 27, pp. 25–31, 2016.
N. Berezhnov and A. Syrbakov, “Improving the efficiency of using a tractor transport unit.” in State and innovations of technical service of machinery and equipment: materials of the XI regional scientific and practical conference of students, postgraduates and young scientists dedicated to the memory of Associate Professor M.A. Anfinogenov, Novosibirsk, 2019.
M. Toshboltaev and B. Kholikov, “Algorithm for selecting a base tractor model to form a tractor train.” Agricultural machinery and technologies, vol. 13, no. 5, pp. 46–55, 2019. https://doi.org/10.22314/2073-7599-2019-13-5-46-50
I. Preda, “Aspects regarding the wheel loads of tractorsemitrailer road train,” in International Automotive Conference CAR2005, Romania, 2005.
O. Bundza, O. Herasymchuk, and M. V., “Substantiation of a significant indicator of the choice of tractor-trailers,” Modern technologies in mechanical engineering and transport, vol. 1, no. 16, pp. 5–10, 2021.
A. Kushnarev, K. E. S. S.V., V. Evdokimov, and E. Reshetnik, “Optimization of the width of the transportation corridor of tractor trains for agricultural purpose,” in E3S Web of Conferences, 2021. https://doi.org/10.1051/e3sconf/202126201004
L. Dominico, “Functional dependence on the speed of transportation means of tractor-trailer train,” in Scientific Conference of the Instituto de Investigaciones de Mecanizacion Agropecuaria, Habana, Cuba, 1985.
M. Surcel, Y. Provencher, and M. J., “Fuel Consumption Track Tests for Tractor-Trailer Fuel Saving Technologies,” SAE International Journal of Commercial Vehicles, vol. 2, no. 2, pp. 191–202, 2010. https://doi.org/10.4271/2009-01-2891
A. 10 Sova, O. Mazlumyan, G.S.and Egorov, S. Eruslankin, and S. Shadrin, “The results of modeling and evaluating the dynamics of the movement of a wheeled tractor,” in IOP Conference Series: Materials Science and Engineering, Kyrgyzstan, 2020. https://doi.org/10.1088/1757-899X/832/1/012013
I. Ryu, D. Kim, and K. Kim, “Power efficiency characteristics of a tractor drive train,” Transactions of the ASAE, vol. 46, no. 6, pp. 1481–1486, 2013. https://doi.org/10.13031/2013.15630
M. Surcel and J. Michaelsen, “Evaluation of tractor-trailer rolling resistance reducing measures,” in SAE 2010 Commercial Vehicle Engineering Congress, United States, 2010. https://doi.org/10.4271/2010-01-1917
E. Krasovskikh, “Improving the efficiency of using the machine-tractor unit by optimizing the characteristics of the engine, working width, parameters and modes of operation: On the example of an arable unit as part of a t-250 tractor,” Phd Thesis, Universidad Técnica Estatal de Altai, Altai, Russia, 1999.
N. Berezhnov, “Materials of the xviii international scientific and practical conference,” in On the issue of research of resistance to movement and compacting effect on the soil of a wheeled tractor train “Modern trends in agricultural production in the world economy”, Kemerovo, 2019.
J. Leuschen and C. J., “The Effects of Ground Simulation on Tractor-Trailer Combinations,” SAE International Commercial Vehicles, vol. 6, no. 2, pp. 510–521, 2013. https://doi.org/10.4271/2013-01-2454
R. DeSantis, R. Hurteau, O. Alboui, and B. Lesot, “xperimental stabilization of tractor and tractor-trailer like vehicles,” in Proceedings of the IEEE Internatinal Symposium on Intelligent Control, Vancouver, Canada, 2002. https://doi.org/10.1109/ISIC.2002.1157760
Y. Perchatkin, “Improvement of dynamic indicators of the movement of tractor trains,” Tractors and agricultural machinery, vol. 80, no. 6, pp. 18–22, 2013. https://doi.org/10.17816/0321-4443-65831
A. Vidiker and B. N.N., “Adaptation of the hardware of the measuring and information complex for the control dynamometry of energy-saturated mta.” in Proceedings of the VIII regional scientific-practical conference of students and postgraduates dedicated to the 80th anniversary of NSAU-NAI., Novosibirsk, 2016.
A. Russini, J. Schlosser, and M. de Farias, “Estimation of the traction power of agricultural tractors from dynamometric tests,” Ciência Rural, vol. 48, no. 4, p. e20170532, 2018. https://doi.org/10.1590/0103-8478cr20170532
G. Haylis and M. Kovalev, Agricultural machinery research and experimental data processing, 1st ed. Moscow: Kolos, 1994.
N. Berezhnov, “Justification of the power unit nominal power when aggregating with a disk tillage tool according to the results of unit dynamometering.” Bulliten of AGAU, vol. 5, no. 151, pp. 163–170, 2017.
F. S.D., A. V.I., G. D.S., and V. E.S., “Energy efficiency of a machine-tractor unit in transient modes,” Izvestiya MGTU MAMI, vol. 11, no. 1, pp. 2–7, 2017. https://doi.org/10.17816/2074-0530-66876
G. Kutkov, V. Sidorov, and S. M.V., “Calculation of engine power and tractor weight of the traction-energy concept,” Electronic journal: science, technology and education, vol. 2, no. 6, pp. 37–46, 2016.
Y. Perchatkin, V. Mirkitanov, and R. V.I., “Calculation of the main parameters of a trailer train to wheeled tractors,” The World of transport and technological machines, vol. 1, no. 40, pp. 40–47, 2013.
P. Koniuszy, A.and Kostencki, A. Berger, and W. Golimowski, “Power performance of farm tractor in field operations,” Eksploatacja i Niezawodnosc – Maintenance and Reliability, vol. 19, no. 1, pp. 43– 47, 2017. https://doi.org/10.17531/ein.2017.1.6
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2022 Revista Ingeniería UC
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.
